2770 Dillard Rd, Eustis, FL 32726
Monday – Friday: 8am – 4pm EST
(866) 226-3667
Hangar doors for two 20,000 SF aircraft hangars in Winston Salem, NC.
AeroDoor has delivered a turnkey package for the design, fabrication, and installation of two bottom rolling hangar doors in Winston Salem, NC.
US Based Aerospace Giant Acquires Another AeroDoor Hangar Door
Aero Doors contracted price included everything from engineered design to an operational door. The only exclusions were concrete and sheeting.
175,000 sqft MRO Hangar, Pensacola Florida
This new 175,000 sqft aircraft hangar facility has it all. A 600ft wide dual bay floating hangar door and two tail doors, office space, workshops, parts and storage mezzanines.
Bombardier Service Center – Miami Opa-Locka, FL
Bombardier, a global leader in business aviation, began 2023 by opening their $100 million aircraft service center at the Miami Opa-Locka airport. AeroDoor was awarded the design, manufacture and installation contract for these doors.
Gulfstream Maintenance Hangar
This service center in Brunswick Georgia has been operational since 2015. A 110,000 sqft pre-engineered metal building with enough space to accommodate a variety of Gulfstream's large cabin aircraft.
Aviation Lab – Winston Salem, NC
The Forsyth Technical Community college’s new $16 million aviation lab consists of a two story 51,962 sqft building and a 16,000 sqft aviation hangar that can accommodate up to 8 of their aircraft
New Service Hangars – Waco Aircraft in Michigan
The airport is situated on a 1,260 acre site and is home to several flight operations including the largest privately owned business jet provider Duncan Aviation.
FBO & Maintenance Hangar – El Paso, Texas
New to El Paso Texas is this sleek 23,000 sqft aircraft hangar and 9,800 sqft FBO executive terminal. An eye-catching property that offers modern hangar space, drinks bar, cafe, pilot facilities, snooze rooms, and conference space. AeroDoor are proud to have been a part of this, and the photos look great.
Hangar Door Refurbishment at an International Airport
A client with critical need to increase the clear opening width and height of their aircraft hangar. The existing clear opening was 80ft wide x 18ft high and needed to be increased to 108ft wide x 22ft high. Here's how we did it
Air Envoy Maintenance Hangar – Springfield, MO
This is a 60,000 sqft aircraft hangar for Air Envoy, a wholly owned subsidiary of American Airlines. Labeled as a maintenance, repair and overhaul (MRO) hangar, it can fit up to three Embraer E175 aircraft and cost approximately $11 million to build.
Private Hangar Door Project in Iuka, Mississippi
A nationwide energy and defense corporation hired AeroDoor to design, manufacture and install a 50ft wide x 56ft tall horizontal rolling door.
Atlantic Aviation – Orlando International Airport
A 29,500 sqft steel aircraft hangar with a further 3,500sqft of office space. AeroDoor was contracted to provide the design, fabrication and installation of the horizontal rolling hangar door.
Bi-Parting Hangar Door with Tail Door
Contracted to design, manufacture and install a bi-parting hangar door with a motorized tail door system. This 78,260 square foot hangar consists of one high-bay and one low-bay designed to accommodate two bridge cranes and 5,000 pound point load attachments for fall protection.
Bi-Parting – System for KC46 Aircraft
Contracted to design, manufacture and install this bi-parting hangar door system at Altus AFB, Oklahoma for the soon to be delivered 11,100SF KC46 aircraft hangar.
Hangar Door with Cable System
Contracted to design, manufacture and install these two hangar doors on a Government Air Force Base in Arkansas. There is a motor operator inside the leading edge panel that drives the hangar door in one direction to open or close.
Military Helicopter Hangar
Contracted to design, manufacture and install this all moving hangar door system on a Government Air Force Base in Colorado. Each hangar door leaf has it’s own motor and controls, allowing them to move independently.
Unidirectional Hangar Door
Contracted to design, manufacture and install this unidirectional bottom rolling hangar door system at Tampa International for a new $33 million building.
C17 Globemaster III Aircraft Hangar Doors
Contracted to design, manufacture and install two unidirectional bottom rolling hangar doors at Pittsburgh Air Reserve for the forthcoming C-17 Globemaster III’s.
Biparting Hangar Door with Windows
We were contracted to design, manufacture and install bi-parting hangar doors for two aircraft hangars in Battle Creek, Michigan. Both doors were bi-parting configuration and of similar size.