AeroDoor Project Portfolio

AeroDoor - El Paso open Hangar door front

Private Aircraft Hangar – El Paso International Airport (El Paso, Texas)

At the owner’s request, the hangar door was designed for fully manual operation with no motorized components. Each door leaf is operated using integrated handles, allowing the user to push or pull individual leaves as needed while maintaining smooth, controlled movement across the full opening.
Castle Avaiation FBO Facility

Castle Aviation 80,000 sqft FBO Facility – Akron–Canton Airport Ohio

Castle Aviation, a long-established cargo and charter operator based at Akron–Canton Airport, has expanded its presence in Northeast Ohio with the grand opening of a new fixed-base operator (FBO) facility in the summer of 2025.
AeroDoor Hangar at Hickory Regional Airport

AeroDoor Installs Unidirectional Hangar Door at Hickory Airport

AeroDoor recently completed the design, manufacture, installation, commissioning, and operator training for a custom hangar door at the newly opened aircraft hangar at Hickory Regional Airport in Hickory, North Carolina.
Melbourne Opening Falcon Maintenance

AeroDoor Delivers Hangar Door Solution for Falcon Maintenance Facility

The facility is capable of accommodating all current Falcon aircraft models—including the ultra-long-range Falcon 10X—and is configured to perform major maintenance, inspections, and aircraft modifications on up to 18 aircraft simultaneously.
Paint-Hangar-Doors

Paint Hangar Doors – Fabricated, Delivered & Installed by AeroDoor

When an aviation client required a specialized paint preparation facility large enough to accommodate both Phenom and Praetor aircraft, they turned to AeroDoor. Our team fabricated, delivered, and installed a custom hangar door system tailored to meet the architects exact requirements.
Marshall USA

AeroDoor Completes 7-Bay Hangar Door System for The Marshall Group

AeroDoor International has successfully completed the engineering, fabrication, and installation of two large-scale horizontal rolling steel door systems for The Marshall Group, a global leader in aerospace and defense.
hangar doors

Aircraft Hangar Construction in Nevada

AeroDoor has successfully completed the design, fabrication, and installation of a horizontal rolling hangar door at Henderson Airport in Nevada.
biparting hangar door

Hangar doors for two 20,000 SF aircraft hangars in Winston Salem, NC.

AeroDoor has delivered a turnkey package for the design, fabrication, and installation of two bottom rolling hangar doors in Winston Salem, NC.
Hangar Door Inside

US Based Aerospace Giant Acquires Another AeroDoor Hangar Door

Aero Doors contracted price included everything from engineered design to an operational door. The only exclusions were concrete and sheeting.
project-titan

175,000 sqft MRO Hangar, Pensacola Florida

This new 175,000 sqft aircraft hangar facility has it all. A 600ft wide dual bay floating hangar door and two tail doors, office space, workshops, parts and storage mezzanines.
Bombardier Hangar

Bombardier Service Center – Miami Opa-Locka, FL

Bombardier, a global leader in business aviation, began 2023 by opening their $100 million aircraft service center at the Miami Opa-Locka airport. AeroDoor was awarded the design, manufacture and installation contract for these doors.
gulfstream hangar

Gulfstream Maintenance Hangar

This service center in Brunswick Georgia has been operational since 2015. A 110,000 sqft pre-engineered metal building with enough space to accommodate a variety of Gulfstream's large cabin aircraft.
large building airport

Aviation Lab – Winston Salem, NC

The Forsyth Technical Community college’s new $16 million aviation lab consists of a two story 51,962 sqft building and a 16,000 sqft aviation hangar that can accommodate up to 8 of their aircraft
Two New Service Hangars for Waco Aircraft in Michigan

New Service Hangars – Waco Aircraft in Michigan

The airport is situated on a 1,260 acre site and is home to several flight operations including the largest privately owned business jet provider Duncan Aviation.
fbohangar6

FBO & Maintenance Hangar – El Paso, Texas

New to El Paso Texas is this sleek 23,000 sqft aircraft hangar and 9,800 sqft FBO executive terminal. An eye-catching property that offers modern hangar space, drinks bar, cafe, pilot facilities, snooze rooms, and conference space. AeroDoor are proud to have been a part of this, and the photos look great.
greenville-spartanburg-hangar-outside

Hangar Door Refurbishment at an International Airport

A client with critical need to increase the clear opening width and height of their aircraft hangar. The existing clear opening was 80ft wide x 18ft high and needed to be increased to 108ft wide x 22ft high. Here's how we did it
envoy hangar open airplanes

Air Envoy Maintenance Hangar – Springfield, MO

This is a 60,000 sqft aircraft hangar for Air Envoy, a wholly owned subsidiary of American Airlines. Labeled as a maintenance, repair and overhaul (MRO) hangar, it can fit up to three Embraer E175 aircraft and cost approximately $11 million to build.
Hangar in Mississippi

Private Hangar Door Project in Iuka, Mississippi

A nationwide energy and defense corporation hired AeroDoor to design, manufacture and install a 50ft wide x 56ft tall horizontal rolling door.
hangar5

Atlantic Aviation – Orlando International Airport

A 29,500 sqft steel aircraft hangar with a further 3,500sqft of office space. AeroDoor was contracted to provide the design, fabrication and installation of the horizontal rolling hangar door.
aerodoor-original-2020_0023s_0030_Screen-Shot-2017-05-08-at-3.05.42-PM

Bi-Parting Hangar Door with Tail Door

Contracted to design, manufacture and install a bi-parting hangar door with a motorized tail door system. This 78,260 square foot hangar consists of one high-bay and one low-bay designed to accommodate two bridge cranes and 5,000 pound point load attachments for fall protection.
aerodoor-original-2020_0023s_0004_IMG_1302

Bi-Parting – System for KC46 Aircraft

Contracted to design, manufacture and install this bi-parting hangar door system at Altus AFB, Oklahoma for the soon to be delivered 11,100SF KC46 aircraft hangar.
Two hangars with open doors

Hangar Door with Cable System

Contracted to design, manufacture and install these two hangar doors on a Government Air Force Base in Arkansas. There is a motor operator inside the leading edge panel that drives the hangar door in one direction to open or close.
aerodoor-original-2020_0005s_0000_IMG_0436_1

Military Helicopter Hangar

Contracted to design, manufacture and install this all moving hangar door system on a Government Air Force Base in Colorado. Each hangar door leaf has it’s own motor and controls, allowing them to move independently.
united hangar

Unidirectional Hangar Door

Contracted to design, manufacture and install this unidirectional bottom rolling hangar door system at Tampa International for a new $33 million building.
C17-Aircraft-Hangar

C17 Globemaster III Aircraft Hangar Doors

Contracted to design, manufacture and install two unidirectional bottom rolling hangar doors at Pittsburgh Air Reserve for the forthcoming C-17 Globemaster III’s.
biparting-window

Biparting Hangar Door with Windows

We were contracted to design, manufacture and install bi-parting hangar doors for two aircraft hangars in Battle Creek, Michigan. Both doors were bi-parting configuration and of similar size.