Aircraft Hangar Door Manufacturer2021-04-12T13:26:56+00:00

Hangar doors designed and manufactured for large openings.

AeroDoor was established in 1978 to design, fabricate and install steel sliding hangar doors. Every door is manufactured at our Central Florida location then delivered and installed by our own installation division.

  • 4 decades experience in the design, fabrication, erection and service of steel sliding hangar doors.
  • All door drawings, engineering and calculations sealed by state Registered Professional Engineer.

4 Decades of Hangar Door Manufacturing

We’ve been a trusted hangar door manufacturer and installer of steel sliding hangar doors since 1978. Manufactured in central Florida and installed worldwide, these tall and wide hangar doors are predominantly sourced by aviation, space, and commercial clients.

AeroDoor can design and manufacture a door to fit inside any size opening on new or existing buildings. Everything is done in house, we design and engineer it, manufacture it and install it. Once the 5-year warranty expires we offer a low cost annual preventative maintenance inspection which is completely optional.

Our reputation is built on manufacturing tough and long lasting hangar doors that glide effortlessly and require minimal maintenance. Each door is designed around hangar door hardware that has a reputation by many to be the best in the industry and more superior to many rival alternatives.

We’ve manufactured and installed hangar doors as far away as Fiji, while closer to home our doors have survived and remained operational after category 5 hurricanes in the Bahamas, Florida, and Louisiana.

Two jets underneath open aircraft hangar - door by AeroDoor.

Installing our own hangar doors and revisiting them in the future for annual service inspections mean we get to see first hand how our door integrated and operated over a period of say twenty years. This level of research is invaluable to AeroDoor because we can go back to the drawing board and see how we improve the door even more. We use these opportunities to develop and maintain the label as the only door for big hangars.

It takes precise engineering to design tall and wide rolling door leaves that can move in fierce climates like South Florida and the Bahamas. To do this we employ a Professional Engineer who carries almost 2 decades of experience in the design and engineering of steel sliding hangar doors. Each one is designed using industrial CAD software for accuracy and tolerances before being verified for building integration.

AeroDoor is a 40 year old family business, built on values of trust, honesty and solid workmanship. That includes using the best components we can to give the best user experience possible.

AeroDoor wont use cheap parts to cut corners and undercut the competition. We’re willing to let them have that slice of the market.

Key Points

We’d love the opportunity to discuss everything we can offer you, but until you’re ready to talk here’s a brief snapshot of what we want you to know before you leave.

  • AeroDoor will manufacture and install your door system.
  • Every door is manufactured by AeroDoor International at our central Florida office and manufacturing facility.

  • Every door is backed by a 5-year workmanship warranty.
  • AeroDoor is a well established manufacturer and installer for Military hangar construction projects.

  • We offer SSPC cleaning and coating services, and UFGS 09 97 13.27 High Performance Coating for Steel.

  • Nothing kills your profitability and timeline like multiple sub contractors. AeroDoor become your only sub contractor for the door.

FAQ

Where does AeroDoor manufacture hangar doors?2021-04-15T12:04:03+00:00

2770 Dillard Road, Eustis. FL 32726

What voltage and phase does your hangar door require?2021-04-15T12:07:42+00:00

Electric motors will be sized according to the door system provided. Typical shall be 480V 3 phase or 208V 3 phase. Other voltage/phases are available.

What is the profile thickness of the exterior sheet and the interior liner that can be applied to the hangar door leaves?2021-03-29T15:03:46+00:00

This is the clients choice. AeroDoor only need to know the profile thickness before we the order moves to engineering.

What is the lead time for a bottom rolling hangar door?2021-04-15T12:06:44+00:00

To give yourself enough time to review and approve our engineering we suggest at a minimum of 10+ weeks for the engineering, manufacturing and delivery.

We always recommend calling for the latest lead times as they are often dictated by the size of the project and the time of year.

What industries does AeroDoor have experience in?2021-04-15T12:11:38+00:00
  • Aviation
  • Space
  • Marine
  • Commercial
  • Rail
I’m an architect designing a new aircraft hangar. What information can you provide?2020-10-09T12:13:14+00:00

We will provide you with pricing, engineering and specifications. This information will allow you to ascertain the projected costs.

Do hangar doors include the sheeting and insulation?2021-04-15T12:13:05+00:00

No. Exterior covering, insulation, interior liner panels, perimeter trim, and flashing are excluded.

Do AeroDoor only deal with general contractors?2021-04-15T12:14:14+00:00

No. AeroDoor will manufacture and install a door for anybody.

Can I install a steel sliding door on an existing hangar that has a different door at present?2021-04-15T12:03:21+00:00

In most cases AeroDoor installers can remove the existing hangar door for you and install a new horizontal steel sliding hangar door.

Can AeroDoor replace partial bottom rail that is damaged?2021-03-29T15:38:55+00:00

Yes. AeroDoor supply and install complete or partial sections of ASCE bottom rail for existing steel sliding doors. We also include new anchor bolts and levelling angles if necessary.

Interested?

We’re really keen to hear from you. Please contact us and a member of AeroDoor will be in touch.

Contact Us

AeroDoor International

2770 Dillard Road | Eustis | Florida | 32726

Phone: 866.226.3667

AeroDoor International

Founded in 1978, AeroDoor is a family owned company committed to the manufacturing, installation and maintenance of aircraft hangar doors.

Go to Top