Motor Operators For Hangar Doors

Motor operators for aircraft hangar doors

Motor Operators for new or existing
Aircraft Hangar Doors.

AeroDoor design and manufacture internal or external motor driven operators for original equipment manufacturers (OEM), custom designs for new construction, or retrofit for existing door installations.
To discuss your needs please call us (866) 226 3667

Six Top Of The Line Features

1 – Variable Frequency Drive Computer System

The unit comes factory programmed to suit most applications. However it can be field programmed to adapt to a specific requirement or owner preference.

Programmable Parameters:

  1. Torque boost: To get even the largest and heaviest doors moving.
  2. Acceleration Time: Smoothly gets the door started. No more sudden jerky movements or tire spin on start up.
  3. Deceleration Time: Brings door to a slow and smooth stop. No more violent stops from full speed.
  4. Top Speed: Allows field adjustment to the projects needs.
  5. Multiple Speeds: Allows door to operate in high speed mode in wide openings and then slow down to normal speed for parking.
  6. Built in Diagnostics: Alerts technician to problems with building power such as low voltage or power spikes.

2- Totally enclosed, fan cooled, inverter-duty rated motor.

Our own AeroGlide motor operators are designed to withstand the harshest environments and heavy usage.

3 – Nord Unibloc Gearbox

  1. One-piece case design eliminates oil leaks.
  2. Greatly oversized output bearings for extended life and greater reserve load capacity.

4 – 2,500lb Capacity Centerbore Stub Axle

Center boring our axle allows maintenance crews to pressure lubricate the sealed automotive bearings through a built in zerk fitting. There is no need to disassemble the unit to repack the wheel bearings.

5 – Adjustable Jack Plate

Allows the drive wheel to be adjusted down for maximum traction or adjusted up off the floor in case of power failure.

6 – Weather hood is standard on all models.

This protects the motor assembly on exterior mounts or during wash down for interior applications. Hood also acts as a safety guard for drive components. The hood is hinged for interior applications, bolted for exterior mount.

AeroGlide Motor Operators

Control panel box for hangar door

We design and build all our motor operators and control boxes on a project by project basis so we can offer clients customizable features, and the greatest amount of power and traction.

rubber tire motor operator

By | 2017-02-23T14:26:45+00:00 November 20th, 2015|Categories: Bottom Rolling Door|Tags: , , , , , , , , , , , , , , , , , |Comments Off on Motor Operators For Hangar Doors